Laser Level 360 Green Cross Line Laser Self Leveling Huepar 8 line Tool 130 Feet

Description

902CG Laser Level Specifications:
Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW
Laser Wavelength: 510±5 nm
Leveling Accuracy: ± 1/9 Inch at 33 Feet
Horizontal/Vertical Accuracy: ± 1/9 Inch at 33 Feet
Leveling/Compensation Range: 4°±1°
Working Distance (Line): 130ft (100 LUX)
Working Distance with Huepar Receiver: 165Ft
Operating Time: 4 hours with all laser beams on
Power Source: 4×˝AA˝ (LR6), it is recommended to use a large capacity (rechargeable) battery.
IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough
Operation Temperature Range: 14℉- 122℉(-10℃-＋50℃)
Items in the Package
1 X Huepar 902CG laser level
1 X Magnetic pivoting Base
1 X Laser target
1 X Cloth case
1 X English User's Manual
Self-leveling mode & Manual mode
Self-leveling mode:
When the laser tool is switched to the unlocked position, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).
Manual mode:
When the pendulum lock is in locked position, you can place the laser tool at various angles to project non-level straight lines. The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.
Three kinds of circuit switching functions:
This professional cross-line laser includes vertical, horizontal and cross-line modes, which can project two lines independently or together. The Huepar 902CG has a manual mode that allows the user to lock the cross-line, to use the tool at any angle.
Each time the power button is pressed once, the laser tool projects horizontal lines, vertical lines, and cross lines in sequence.
360° cover horizontal line and 360° vertical line (H360°/V360°)
Brighter green beams
Intense Green Line Laser with Higher Visibility, It's more brighter and eye friendly than red laser, which gives you a more comfortable experience.
New green diode technology makes green beams 300% as bright as red beams at the same distance, ideal for bright conditions where red beams are hard to see.
Pulse Mode
Turn ON pulse mode: Slide the pendulum to the Unlocked Position, then press and hold the power button to turn on the pulse mode, the indicator lights up in blue.
Application：When the pulse mode turned on, laser tool can be used with a laser receiver to work in brighter condition or a larger working distance.
Note: ●When use with a receiver, it’s necessary to turn on the pulse mode ●It is compatible with Huepar Line Laser Receiver only.
Widely used
Huepar's laser tools can help you work effectively in home decoration: such as line up some planters in anticipation of a new decking projects, home refurb projects, hang pictures, mirrors, curtain rails etc.
And it can also work for railway construction, bridge construction, wall construction, etc.
Copyright © Huepar. All rights reserved.